PRODUCT CATALOGS in pdf with full technical details of all our products are available online now in Downloads section for your reference.

Intesis acquires Houseinhand
Intesis, a global home and building automation manufacturing company based in Spain, today announced the acquisition of Houseinhand. With the newly acquired Houseinhand App for iOS, Intesis enhances a new phase of a dedicated effort to expand their well reputated role in BMS areas to a wider consumer oriented home automation Read more ...

BACNET - DALI
2010/11/15. New gateway IntesisBox^® - BACNET - DALI. BACnet/IP Server and DALI Master device allowing to control up to 64 DALI ballasts from BACnet using standard BACnet objects. Powered at 230Vac. No need of external DALI power supply as the gateway supplies the necessary power to the DALI bus.

BACNET - LONWORKS
2010/11/15. New gateway IntesisBox^® - BACNET - LON. BACnet/IP Server interface allowing read/write points by polling and/or subscription (COV) requests. LON interface polls continuously LON devices to integrate, bindings not needed in LON side. Allows to supervise/control easily any LON device (BMS, PLC, AirCon, Fancoil controller...) from your BACnet system (BMS, DDC, PLC, SCADA ...).

KNX - LG AC
2010/11/15. New gateway IntesisBox^® - KNX - LG AC. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Allows to monitor and control LG Air Conditioning systems from KNX. Two models available with different capacity, for integration of 16 and 64 AC indoor units respectively. Fully flexible configuration allowing to associate the desired KNX group address to each variable of the AC units.

MODBUS SLAVE (4 PORTS)
2010/09/15. New gateway IntesisBox^® - Modbus Slave (4 ports). A unique device allowing to share data between up to 4 modbus masters simultaneously. Two Modbus RTU RS232/RS485 slave ports and two Modbus TCP slave ports and a single and complete address map. No configuration is required except for the communication parameters of the ports. Any data written in any register by any of the masters can be read by the others and vice versa, all the address map of the Modbus specification is supported and can be used.

EnOcean - DAIKIN Aircon (Domestic line)
2010/09/15. New gateway IntesisBox^® - EnOcean - DAIKIN AC. Reduced dimensions. Quick installation. External power not required. Direct connection to the AC indoor unit. Compatible with all models of Daikin Domestic line of air conditioners. Fully EnOcean interoperable. Multiple profiles. Two versions available, for 868Mhz and for 315Mhz...

EnOcean - MITSUBISHI ELECTRIC Aircon
2010/09/15. New gateway IntesisBox^® - EnOcean - Mitsubishi Electric AC. Reduced dimensions. Quick installation. External power not required. Direct connection to the AC indoor unit. Compatible with all models of Mitsubishi Electric Domestic and Mr.Slim lines of air conditioners. Fully EnOcean interoperable. Multiple profiles. Two versions available, for 868Mhz and for 315Mhz...

KNX - SAMSUNG AC
2010/09/15. New gateway IntesisBox^® - KNX - SAMSUNG AC. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Allows to monitor and control SAMSUNG Air Conditioning systems from KNX. Three models available with different capacity, for integration of 16, 64 and 128 AC indoor units respectively. Fully flexible configuration allowing to associate the desired KNX group address to each variable of the AC units.

MODBUS - SAMSUNG AC
2010/09/15. New gateway IntesisBox^® - Modbus Server - SAMSUNG AC . Modbus server RTU RS232/RS485 or TCP selectable by the user, acts as a Modbus slave device. Allows to monitor and control SAMSUNG Air Conditioning systems from a Modbus master device (PLC, SCADA...). Three models available with different capacity, for integration of 32, 64 and 128 AC indoor units respectively. Very easy to configure, fixed modbus address map, just selection of the AC units to integrate and configuration of the modbus communication parameters is required.

KNX - DAIKIN Aircon (Domestic line)
2010/01/08. New gateway IntesisBox^® - KNX EIB - DAIKIN AC. Small and compact, allows monitoring/control of DAIKIN Air Conditioners (Domestic line) from KNX EIB. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Configurable from ETS. Database for ETS in different languages. Full monitoring and control, with multiple objects and great functionality: save/execute scenes...

KNX - DAIKIN Aircon (SKY & VRV)
2010/01/08. New gateway IntesisBox^® - KNX EIB - DAIKIN AC. Small and compact, allows monitoring/control of DAIKIN Air Conditioners (SKY & VRV) from KNX EIB. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Configurable from ETS. Database for ETS in different languages. Full monitoring and control, with multiple objects and great functionality: save/execute scenes...

MODBUS TCP - MODBUS RTU (RS232/RS485)
2010/01/08. New gateway IntesisBox^® - MODBUS TCP Server - MODBUS RTU Master. Transparent operation, allows to communicate with Modbus RTU slave devices (RS232 or RS485) from any Modbus TCP master (BMS, SCADA, HMI...). Allows multiple TCP masters communicating simultaneously with the RTU slaves. Simple configuration, only communication parameters on TCP and RTU, no need of register mappings. Software for configuration and for communication monitoring provided without additional cost. An easy-to-setup and very cost affordable device allowing remote monitoring of your Modbus RTU slave devices (PLCs, Meters, Chillers...).

LONWORKS - KNX EIB
2009/05/15. New gateway IntesisBox^® - LONWORKS - KNX EIB. Full integration between LON and KNX is possible. Automatic import of KNX group addresses exported from ETS. Mapping between KNX group addresses and LON SNVTs by simple drag & drop. Fully compatible with LonWorks networks (bindings allowed) and LonWorks commissioning tools (LonMaker). Dual LON interface for compatibility with both, legacy and enhanced network management.

KNX - MITSUBISHI ELECTRIC AIRCON (Version 2)
2009/03/01. A new version of the gateway IntesisBox^® - KNX EIB - Mitsubishi Electric AC is available. Smaller and compact, allows even more powerful monitoring and control of Mitsubishi Electric Room Air Conditioners from KNX. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Configurable from ETS. Database for ETS in different languages (available at downloads section). Full control and supervision, with new and more flexible objects, save/execute scenes...

MODBUS - LONWORKS
2008/05/01. New gateway IntesisBox^® - Modbus Server - LON. Allows to supervise and control LonWorks devices from Modbus based control systems (BMS, PLC, SCADA...). Modbus slave interface, RTU RS232/RS485 or TCP selectable by the user. Specially suited for the integration of small and medium size DAIKIN VRV Air Conditioning systems into your Modbus based control system. Configuration files available for many Aircon brands for an easy and quick configuration of the IntesisBox.

MODBUS - MITSUBISHI ELECTRIC AIRCON
2008/01/21. New gateway IntesisBox^® - MODBUS - Mitsubishi Electric AC . Allows to supervise and control Mitsubishi Electric Room Air Conditioners from Modbus. Direct connection to Modbus RTU RS485 networks, internal isolation, compatible with all Domestic & Mr.Slim lines. Configurable from Modbus as well as from on-board DIP-switches. User manual available at downloads section. Full control and supervision.

LONWORKS - MITSUBISHI ELECTRIC AIRCON
2007/12/15. New gateway IntesisBox^® - LON - Mitsubishi Electric AC . Allows to supervise and control Mitsubishi Electric Room Air Conditioners from LonWorks. Direct connection to LonWorks FT/TP-10 networks, internal isolation, compatible with all Domestic & Mr.Slim lines. Configurable from LonMaker. XIF file available at downloads section. Full control and supervision.

KNX - LONWORKS
2007/11/15. New gateway IntesisBox^® - KNX EIB - LON . Allows to monitor and control LON devices from KNX. Specially suited for the integration of small and medium size DAIKIN VRV Air Conditioning systems into your KNX installation. Configuration files available for an easy and quick configuration of the IntesisBox for DAIKIN VRV integration. More info...

MODBUS - NOTIFIER
2007/11/15. New gateway IntesisBox^® - Modbus Server - Notifier ID3000 Series . Modbus server RTU RS232/RS485 or TCP selectable by the user, acts as a Modbus slave device. Allows to supervise and control Notifier ID3000 Series Fire Panels from a Modbus master device (PLC, SCADA...). More info...

OPC SERVER - NOTIFIER
2007/11/15. New gateway Intesis OPC Server - Notifier ID3000 Series . OPC Server for Windows^® operating systems that allows to supervise and control Notifier ID3000 Series Fire Panels from any SCADA or monitoring software with OPC client driver. More info...

MODBUS - ESSER
2007/11/15. New gateway IntesisBox^® - Modbus Server - ESSER 8007/8008 . Modbus server RTU RS232/RS485 or TCP selectable by the user, acts as a Modbus slave device. Allows to supervise and control ESSER 8007/8008 Fire Panels from a Modbus master device (PLC, SCADA...). More info...

OPC SERVER - ESSER
2007/11/15. New gateway Intesis OPC Server - ESSER 8007/8008 . OPC Server for Windows^® operating systems that allows to supervise and control ESSER 8007/8008 Fire Panels from any SCADA or monitoring software with OPC client driver. More info...

BACNET - MODBUS
2007/09/11. New gateway IntesisBox^® - BACnet IP Server - Modbus RTU master . BACnet IP Server interface allowing read/write points by polling and/or subscription (COV) requests. Modbus RTU master interface over RS232 or RS485, software selectable. Allows to supervise/control any modbus RTU slave device (BMS, PLC, AirCon...) from your BACnet system (BMS, DDC, PLC, SCADA ...). More info...

KNX - BACNET
2007/07/19. New gateway IntesisBox^® - KNX EIB - BACnet IP Client . Allows to monitor and control BACnet IP devices from KNX. Specially suited for the integration of large DAIKIN VRV Air Conditioning systems into your KNX installation. Configuration files available for an easy and quick configuration of the IntesisBox for DAIKIN VRV integration.

ASCII - BACNET
2007/05/04. New gateway IntesisBox^® - ASCII Server - BACnet IP Client . Allows to supervise and control BACnet IP devices from an ASCII enabled device. Specially suited for the integration of DAIKIN VRV Air Conditioning system into your ASCII enabled control system (AMX, Crestron...). Configuration files available for an easy and quick configuration of the IntesisBox for DAIKIN VRV integration.

MODBUS - BACNET
2007/05/04. New gateway IntesisBox^® - Modbus Server - BACnet IP Client . Allows to supervise and control BACnet IP devices from a ModBus master device. Specially suited for the integration of DAIKIN VRV Air Conditioning system into your BMS, SCADA, PLC... "talking" ModBus. Supports ModBus TCP or RTU (RS232 or RS485). Acts as a ModBus slave device. Configuration files available for an easy and quick configuration of the IntesisBox for DAIKIN VRV integration.

KNX - AIRZONE AIRCON
2007/05/04. New gateway IntesisBox^® - KNX EIB - Airzone InnoBus . Allows to supervise and control Airzone InnoBus air-conditioning system from KNX. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler.

Intesis Software becomes TREND Interface Specialist.

In April '07 Intesis Software was certified by TREND Controls, becoming the first approved TIS in Spain. This brings a new line of integrations based on the new IQ3 XNC device in the form of exciting solutions for Trend Integrators. This new line of solutions comes to empower even more our existing full range of integration solutions for TREND Controls systems. More info...

KNX - MITSUBISHI ELECTRIC G50
2007/03/23. New gateway IntesisBox^® - KNX EIB - Mitsubishi Electric G50 . Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Allows to supervise and control Mitsubishi Electric City Multi Air Conditioning systems from KNX. More info...

MODBUS - MITSUBISHI ELECTRIC G50
2007/03/23. New gateway IntesisBox^® - Modbus Server - Mitsubishi Electric G50 . Modbus server RTU RS232/RS485 or TCP selectable by the user, acts as a Modbus slave device. Allows to supervise and control Mitsubishi Electric City Multi Air Conditioning systems from a Modbus master device (PLC, SCADA...). More info...

MODBUS - CERBERUS
2007/03/23. New gateway IntesisBox^® - Modbus Server - Siemens Cerberus . Modbus server RTU RS232/RS485 or TCP selectable by the user, acts as a Modbus slave device. Allows to supervise and control Siemens Cerberus Fire Panels from a Modbus master device (PLC, SCADA...). More info...

BACNET - KNX
2007/01/22. New gateway IntesisBox^® - BACnet IP Server - KNX EIB . BACnet IP Server device allowing read/write points and subscription (COV) requests. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Allows to supervise/control the EIB system from BACnet ( PLC, SCADA ...). More info...

MODBUS - KNX
2006/11/30. New gateway IntesisBox^® - KNX EIB - Modbus TCP/RTU slave. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Modbus Server TCP or RTU RS232/RS485 selectable by the user, acts as a Modbus slave device. Allows to supervise/control the EIB system from Modbus ( PLC, SCADA ...). More info...

KNX - MODBUS TCP
2006/11/20. New gateway IntesisBox^® - KNX EIB - Modbus TCP master. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Modbus client TCP, acts as a Modbus master device. Allows to supervise/control the Modbus system from EIB. More info...

KNX - MODBUS RTU
2006/11/01. New gateway IntesisBox^® - KNX EIB - Modbus RTU master. Direct connection to KNX TP1 (EIB) via internal opto-isolated bus coupler. Modbus client RTU RS232/RS485 selectable by the user, acts as a Modbus master device. Allows to supervise/control the Modbus system from EIB. More info...

MODBUS - M-BUS
2006/11/01. New gateway IntesisBox^® - Modbus - MBus (metering bus). Modbus server RTU RS232/RS485 or TCP selectable by the user, acts as a Modbus slave device. Connects to M-Bus using external converter RS232/M-Bus. Allows to supervise the M-Bus system from Modbus. More info...

2006/11/01. Intesis Software renews its IntesisBox^® line with new hardware versions incorporating some interesting new features: extended temperature range, a wide margin for supply voltage (DC and AC), and a better functionality for installation, supervision and working (LEDs, push buttons and plug-in terminal blocks). All new versions are compliant with RoHS directive (2002/95/CE).

2005/01/01. From the year 2000, Intesis Software has been implementing multiple integrations for different building and industrial automation systems. After the success of our integrations in the Spanish and Portuguese markets, now Intesis Software launches internationally its integration product range for the integration of automation systems with many external systems such as HVAC, security systems, fire systems, hotel management, cold/warm generation, SCADA systems, standard buses, lighting control, etc. (Bacnet/IP, M-Bus, Modbus, KNX, OPC, DDE...).